150mm heel hub cleaner for cleaning studless wheel hubs by eliminating corrosion and dirt from the contact area of the hub and the inner part of the wheel. Specially designed to clean studs, brake discs, brake drums and prepare hubs for wheels to be reinstalled on the vehicle. Suitable for use with a 1/2" drive impact wrench and requires only light pressure for optimal performance. Feature an external diameter of 150mm and an internal diameter of 90mm. Replacement hub cleaning abrasive pads (SATRA S-RG150W) sold separately.

Professional 6 pin 82mm castellated impact socket for removal and installation of grooved rear hub lock nuts fitted to Mercedes-Benz Sprinter vans. Specially designed 6 teeth profile for use with 1/2" drive ratchet or impact wrench. Suitable for twin rear wheel hubs Mercedes-Benz Sprinter (groove nut OEM: A970 356 0026) vehicles. Made of hardened and tempered Chrome Molybdenum (Cr-Mo) steel with manganese phosphate finish for extra corrosion resistance. Manufactured for professional daily use with air or battery powered impact wrench. Supplied as individual impact hub nut socket.

Digital voltage multi-meter for general purpose electronics testing and measuring both DC and AC voltages, DC current, continuity, diode test, resistance and transistors. Feature clear and easy to read digital LCD display with backlight, continuity buzzer, data hold function, low battery indicator, overload protection and hFE transistor socket. Specially designed double fuse compact size for ease of use with an integral flip down stand. Supplied with a pair of robust test leads and probes.

General purpose professional semi circular heel dolly specially designed to be place against contoured, curved or rounded bodywork panels. Suitable for reshaping crowned panels and general panel beating. Made of high quality drop forged steel and heat treated under controlled conditions with a polished mirror finish to a highest standard. Different shape and size panel beating dollies and hammers sold separately.

Diesel injector seal puller suitable for removal of the copper washers from the cylinder head. Specially designed without any moving parts to avoid drop into the engine, simply tap threaded end and screw the tool into the center of the copper washer. Feature threaded tip diameter between Ø4.5mm to 13.2mm and 1kg slide hammer for easy diesel injector seals extraction. Diesel injector seat cleaner (SATRA S-XDI6) sold separately.

Professional spark plug boot pliers specially designed to ensure the safe removal of stubborn insulation boots. Feature spring loaded long handles, non-marking plastic tips and 45° offset uniquely shaped jaw for easy accessing hard to reach areas. Long reach and high quality pliers construction suitable for effortless spark plug maintenance and improved engine access.

12" self-adjustable oil filter removal pliers (60-120mm) designed to self-adjust to the correct size and automatically tighten the grip once you turn. Suitable for a wide range of oil or fuel filters size between 60-120mm. Feature non-slip PVC coated long handles (300mm) and low profile serrated jaws for extra leverage and grip. Made of high quality drop forged layered carbon steel for increased strength and durability. Perfect for use on most vehicles.

Single phase 6/ 12V battery charger with jump starter function suitable for regular and low maintenance batteries (20-150Ah). Possible use as a starting source in case of battery discharge or as an aid when starting at very low temperature. Feature large ammeter display rate of charge, fuse mounted in front of the device provides safe operation thanks to reverse polarity protection and pole shorting in the event of the charging cables (clamps) being connected incorrectly. Easy operation with several buttons and battery connection using color-coded clamps. Steel case with a strong carry handle with good ventilation to help maintain low transformer temperature.

Professional air vacuum dent puller set specially designed to enable the user to pull out dents in car body panels without damage to the paint work. Once the dent puller is connected to the air supply and the suction pad to the vehicles dented panel, a vacuum is created between the suction pad and the vehicle body allowing the slide hammer to be used to pull out the dent. Supplied in carry case.

Universal coil spring compressor set specifically designed to assembly MacPherson struts fitted to most vehicles. Supplied with heavy duty extending shaft (up to 265mm) and 3 different size interchangeable pressure plates with plastic covers to protect spring from damage. Maximum clamp force of 1000kg and anti slip shape jaws ensure safe compression of springs. Includes an adaptor that allows use on conical springs fitted to Alfa Romeo, Chrysler, Nissan, Seat and Volkswagen. Supplied in carry case.

10 tonne bench press fitted with ram pressure gauge (filled with glycerine for easy reading) and smooth hydraulic hand pump action to ensure precise force application. Steel frame construction with 135mm cylinder stroke, ideal for automotive garage and engineering workshops for bending or pressing out ball joints, U joints, pulleys etc. Supplied with heavy duty pressing blocks. Manufactured according CE, TUV and GS safety standards.

Professional 12 point double ended glow plug ratchet spanner 8x12mm for the removal and installation of glow plugs. Perfect for removing glow plugs located between the engine and the injection pump on Audi, BMW, Mercedes-Benz etc. Overall length of 300mm. Made of hardened carbon steel. 8x10mm double ended glow plug ratchet spanner (ASTA A-606-810) sold separately.

Air operated vacuum cooling system filling tool, depressurises the cooling system and ensures perfect bleeding. Refills and bleeds the air from cooling systems quickly and without wasting new coolant. Supplied with set of connectors compatible with almost all makes and models. Perform the perfect drainage thanks to vacuum cooling system.

Professional adjustable height cushioned and easy to clean mechanic's seat for working at low level. Feature 5 swivel ball-bearing castor wheels for smooth operation and manoeuvrability. Specially designed with integrated storage tray under the seat for quick and easy access to your tools. Metal frame offers maximum support and the oil resistant anti-fatigue seat provides total comfort. Suitable for use by professional mechanics in garage or workshop and DIY enthusiasts or hobbyists at home.