Fuel and additive funnel suitable for capless filler systems found on Ford diesel vehicles fitted with anti-misfuelling flaps. Angled and anti-splash long neck design to open the vehicle internal flap 2 valve security system to enable emergency refuelling or the addition of fuel additives. Specially designed rim of the funnel feature a notch to fit perfectly with fuel additive bottles for easy filling. Made of tough polypropylene (PP) plastic for performance and durability. Fuel and additive funnel for petrol vehicles (ASTA A-1PFP) sold separately.

IMPORTANT: Designed for diesel fuel filler only.

Diesel injector seal puller suitable for removal of the copper washers from the cylinder head. Specially designed without any moving parts to avoid drop into the engine, simply tap threaded end and screw the tool into the center of the copper washer. Feature threaded tip diameter between Ø4.5mm to 13.2mm and 1kg slide hammer for easy diesel injector seals extraction. Diesel injector seat cleaner (SATRA S-XDI6) sold separately.

3pc socket adaptor set specially designed for use with 1/4" hexagon drive drill chuck and incorporates conversion to 1/4", 3/8",1/2" square drive standard or impact sockets. Suitable for use with air, battery or electric powered drills, screwdrivers or any 1/4" hex drive hand tools. Made of hardened and tempered Chrome Vanadium (Cr-V) steel with spring-loaded retaining ball for extra security and safe socket holding. Set includes 1/4" hex x 1/4" square, 1/4" hex x 3/8" square and a 1/4" hex x 1/2" square drive adaptors.

IMPORTANT: Not suitable for use with impact tools.

Professional spark plug boot pliers specially designed to ensure the safe removal of stubborn insulation boots. Feature spring loaded long handles, non-marking plastic tips and 45° offset uniquely shaped jaw for easy accessing hard to reach areas. Long reach and high quality pliers construction suitable for effortless spark plug maintenance and improved engine access.

Timing tool set to lock engine chain in correct position on Mercedes-Benz 1.8, 2.1, 2.2L (M651) diesel engine while camshaft drive chain adjustment, removal or installation work is undertaking. Specially designed for M651 engine manufactured after 2012 including engines used in Mercedes-Benz hybrids. Set includes tool for locking the crankshaft pulley, camshaft locking plate, timing chain guide bar and offset female E14 star/ Torx® wrench for camshaft fixing bolts. Can be use in conjunction with timing chain splitting/ fitting tool set (ASTA A-7022UPG). Balance shaft locking bar (ASTA A-M651UPG) sold separately. Supplied in carry case.

Torx® and Torx Plus® are registered trademarks of Acument Intellectual Properties, LLC.

M10 ball end long reach spline socket bit for removal and installation of the VAG intake manifold fixings on 2.0 TDI common rail diesel engine manufactured from 2013 and fitted to Audi A3, Volkswagen Golf models (from 2013). Feature ball end M10 spline bit for easier access in hard to reach areas, suitable for use with 1/2" drive ratchet or extension bar. Socket made of hardened and tempered Chrome Vanadium (Cr-V) steel and bit made of impact grade S2 steel with matt finish for corrosion resistance. Each feature knurled ring for extra grip and performance. Overall length of 140mm. Supplied as individual M10 ball end spline socket bit. OEM: T10501.

Professional heavy duty torque multiplier set 3/4"D (Female) to 1"D (Male) with maximum torque output of 2500Nm, input of 758Nm. Gear ratio 1:4 and torque ratio of 1.3.3. Suitable for loosening and tightening seized threaded bolts, fasteners on HGV, truck, trailers and other heavy duty machinery. Supplied in carry case.

Protective lightweight work gloves with nitrile coated fingers and palm designed for improved level of grip, dexterity and perfect feeling of the held objects. Perfect fit to the hand and blue nitrile coat increases abrasion, cut and puncture resistance. Very flexible with an elastic close-fitting welt and breathable knitted back for enhanced comfort. Made of white polyester knitted fabric (13 stitch) with the advantage of quick drying, durability and resistance to seepage. Resistant to acids, engine oils, hydrocarbons, oil based liquids and lubricants, organic solvents or fats. Biodegradable gloves can be washed and will retain it's form. Supplied as pack of 24 gloves (12 pairs).

SATRA 0.30mm Circular Wire Wheel 120mm Diameter

 Wire S-5WBC125

SATRA wire wheel made of hight quality crimped steel for more durability. Can be mounted on any bench grinders and easy adjust to different bore sizes with plastic bore adapters. 

Perfectly design to remove stubborn rust, corrosion, paint and weld spatter. Widely used to prepare surfaces prior to painting or polishing, such as steel tubes, car parts or boat hulls.

Diameter: 125mm

Wire: 0.3mm

Type: Circular

Max 6000 RPM.

SATRA Circular Wire Wheel 200mm x 25 x 32mm 0.30mm Wire S-8WBC200

SATRA wire wheel made of hight quality crimped steel for more durability. Can be mounted on any bench grinders and easy adjust to different bore sizes with plastic bore adapters. Bore size: 32mm -25, 22, 20, 16 &12mm.

Perfectly design to remove stubborn rust, corrosion, paint and weld spatter. Widely used to prepare surfaces prior to painting or polishing, such as steel tubes, car parts or boat hulls.

Diameter: 200mm x 25mm

Bore range size: 32mm (25, 22, 20, 16 &12mm bushes included)

Wire: 0.3mm

Type: Circular

Max 4500 RPM.

12" self-adjustable oil filter removal pliers (60-120mm) designed to self-adjust to the correct size and automatically tighten the grip once you turn. Suitable for a wide range of oil or fuel filters size between 60-120mm. Feature non-slip PVC coated long handles (300mm) and low profile serrated jaws for extra leverage and grip. Made of high quality drop forged layered carbon steel for increased strength and durability. Perfect for use on most vehicles.

12pc imperial 12 point socket set on a storage rail for use with 1/4" drive ratchet or extension bar. Overall length of 25mm. Socket made of hardened and tempered Chrome Vanadium (Cr-V) steel with matt finish for corrosion resistance. Each feature knurled ring for extra grip and performance. Individual replacement imperial sockets sold separately. Supplied on a storage rail.

Motorcycle wheel rim protector set with string cord designed to reduce the risk of damage to rim while removing or fitting tyres. Feature long string cord for easy removal of the rim. Made of moulded soft material to avoid damage to the rims with tyre lever. Supplied as pack of 2.

3pc inflatable air wedge kit for emergency door opening in case of a lock failure without scratches or damage to vehicle body work. Slim profile for easy insertion in narrow gaps inflates between 2mm to 75mm for lifting, levelling or wedging.

Drain pan holder adaptor designed to convert a transmission jack into an oil drainer, holder replaces jack saddle in seconds. Designed to be use with black oil/ fluid drain pan 16L (ASTA A-9004B) or green antifreeze/ fluid drain pan 16L (ASTA A-9004G) sold separately. Suitable for most transmission jacks (ASTA A-T05004) available on the market. 

Professional socket storage rail fitted with 10pc retaining clips for 1/2" drive. Overall length of 275mm with drilled holes for wall mounting or cabinet fixing. Made of chrome plated steel with fully polished mirror finish for resistance to corrosion. Socket storage rail and 10pc retaining clips for 1/4" drive (ASTA A-R40014) and 3/8" drive (ASTA A-R40038) sold separately.