Professional 12 point double ended glow plug ratchet spanner 8x12mm for the removal and installation of glow plugs. Perfect for removing glow plugs located between the engine and the injection pump on Audi, BMW, Mercedes-Benz etc. Overall length of 300mm. Made of hardened carbon steel. 8x10mm double ended glow plug ratchet spanner (ASTA A-606-810) sold separately.

Professional 12 point double ended glow plug ratchet spanner 8x10mm for the removal and installation of glow plugs. Perfect for removing glow plugs located between the engine and the injection pump on Audi, BMW, Mercedes-Benz etc. Overall length of 300mm. Made of hardened carbon steel. 8x12mm double ended glow plug ratchet spanner (ASTA A-606-812) sold separately.

7pc professional damaged glow plug puller set designed to grip external or internal section of the broken glow plug to help extracting them from the cylinder head by slid hammer. Set includes T-bar slide hammer, internal puller (expansion collet), external grips and contraction collets (Ø2.7, 3.6, 5.0mm). Supplied in carry case.

16pc comprehensive damaged/ sheared off glow plug removal tool kit for removing broken glow plugs from cylinder heads. Specially designed for glow plugs with M8x1mm and M10x1mm thread. Set includes necessary tools (adaptors, centring, pulling and thread cleaning tools) to safely remove glow plugs without damaging to the cylinder head. Supplied in carry case.

3pc professional 8, 9, 10mm socket set with lateral slot specially designed to remove and install glow plugs without need to cut off the power wire from the glow plugs. Suitable for glow plug where the lead cable restricts access on Alfa Romeo, Fiat, Saab and Vauxhall/ Opel and some PSA vehicles. Supplied in handy storage case.

9pc professional damaged glow plug removal tool set for removing broken (sheared off) glow plugs with M9x1.0 thread from cylinder heads fitted to Audi, Fiat, Mercedes, Peugeot, Renault, Seat, Skoda, Vauxhall/ Opel, Volkswagen etc. Set includes all necessary tools for safely remove glow plugs without damaging to the cylinder head. Supplied in handy storage case.

9pc professional low torque air impact glow plug removal wrench set for use with 1/4" drive impact sockets specially designed to remove seized diesel glow plugs and small bolts or fixings. Feature 4 pre-set torque settings (10, 20, 3, 40Nm) for slow impact vibrations to safely unscrew stuck/ seized diesel glow plugs without damage to them. One-hand operated trigger with forward/ reverse switch and handle exhaust to help lower noise level when in use. Set includes 1/4" drive air impact wrench, impact sockets (8, 9, 10, 11, 12mm), universal joint and extension bar (50, 100mm), made of Chrome Molybdenum (Cr-Mo) steel with manganese phosphate finish for extra corrosion resistance. Supplied in storage case.

6pc professional damaged glow plug electrode removal socket set to remove stuck, seized glow plugs for use with 1/4" drive ratchet or extension bar. Specially designed to remove internal electrode and leave a neat centred hole in the glow plug in preparation for drilling out. Manufactured from Chrome Molybdenum (Cr-Mo) steel with manganese phosphate finish for extra corrosion resistance. Supplied in handy storage case.

Professional angled long nose glow plug pliers for removal hard to reach glow plugs connectors without any damage to diesel engine. Suitable for diesel engines fitted to Audi, BMW, Mercedes-Benz, Volkswagen etc. Feature angled at 90° head for easier direct access, soft grip handles with thumb restraints for extra grip and pressure. Overall length of 235mm. Straight long nose glow plug removal pliers (ASTA A-548) sold separately.

Professional straight long nose glow plug pliers for removal hard to reach glow plugs connectors without any damage to diesel engine. Suitable for diesel engines fitted to Audi, BMW, Mercedes-Benz, Volkswagen etc. Feature straight head for easier direct access, soft grip handles with thumb restraints for extra grip and pressure. Overall length of 245mm. 90° angled long nose glow plug removal pliers (ASTA A-558) sold separately.

28pc damaged glow plug thread repair set for drilling out damaged or torn-off glow plugs without removing the cylinder head, suitable for VAG (Audi, Volkswagen) M10x1 glow plug thread bore fitted to 2.5, 2.7, 3.0L V6 TDI engine. Specially designed to clean electrode bore, re-cut or repair glow plug thread by reaching the exact depth and drilling angle thanks to included guide sleeves. Supplied in carry case.

Professional glow plug heater element removal set to extract the heater element which can break off while glow plug is pull out. Saves a lot of time and money as there is no need to remove the cylinder head. Designed to work by drilling and tapping a thread into the broken element then supplied adaptor can take glow plug. Set includes HSS drill bits (Ø2.5x120mm, 3.2x140mm), taps (M3x0.5, M4x0.7), drilling/ tapping guides (M8 x1mm, M10x1mm, M10x1.25mm) and M3, M4 threaded rods. Made of hardened and tempered Chrome Molybdenum (Cr-Mo) steel with manganese phosphate finish for extra corrosion resistance. Supplied in handy storage case.

16pc professional damaged glow plug removal tool set specially designed for removing broken (sheared off) glow plugs from cylinder heads. Suitable for glow plugs with M8x1mm and M10x1mm thread. Set includes adaptors, centring, pulling and thread cleaning tools for safely remove of glow plugs without any damage to the cylinder head. Supplied in carry case.

33pc glow plug thread repair kit for repairing the glow plug mounting thread on alloy cylinder heads. Suitable for re-threading and repair of 8mm, 10mm and 12mm glow plugs. Set includes taps (M8x1.0mm, M10x1.0mm, M10x1.25mm, M12x1.0mm, M12x1.25mm, M14x1.25mm) and tools for correct insertion of spare threaded inserts/ coils (M8x1.0mm, M10x1.0mm, M10x1.25mm, M12x1.0mm, M12x1.25mm) into the head. Inserts overall length is 12mm. Supplied in handy storage case.

33pc professional glow plug thread re-fitting set for easy and quick repair of the glow plug mounting thread in alloy cylinder heads. Suitable for re-threading and re-fitting of 8mm, 10mm and 12mm glow plug. Set includes taps (M8x1.0mm, M10x1.0mm, M10x1.25mm, M12x1.0mm, M12x1.25mm, M14x1.25mm) and tools for correct insertion of spare threaded inserts/ coils (M8x1.0mm, M10x1.0mm, M10x1.25mm, M12x1.0mm, M12x1.25mm) into the head. Glow plug insert overall length is 12mm. Supplied in handy storage case.