New products

  • 0 Review(s) 

    SATRA S-22TDCI Locking Tool Kit For Ford & Land Rover 2.2 ECOnetic/ TD4, 3.2 TDCi

    S-22TDCI
    £17.95

    Locking tool kit for use with chain-driven Ford 2.2, 3.2 ECOnetic/ HDT/ TDCi and Land Rover 2.2 TD4 diesel engines manufactured from 2006 to 2018. Specially designed to securely lock the crankshaft, chain sprocket and flywheel in the correct timing position to allow adjustment or replacement of the cam chain. Feature special tool to accurately set top dead centre (TDC) sensor position. Suitable for Ford Ranger, Transit, Tourneo Custom, Jaguar X-Type and Land Rover Defender. Set includes camshaft locking pins and a crankshaft holding tool. Supplied in handy storage case.

  • 0 Review(s) 

    ASTA A-14ASPV Air Suspension Pressure Valve Socket For VAG

    A-14ASPV
    £9.79

    Professional pressure valve socket for VAG air suspension system equipped with a small air control valve fitted on top of each suspension strut. Specially designed for removal and installation of suspension air pressure valve. Valve can be accessed after the air pipe is removed. Feature special 2 pin castellated profile for use with 1/4" drive ratchet and extension bar. Suitable for Audi Q7, Porsche Cayenne and Volkswagen Touareg. Made of hardened and tempered Chrome Vanadium (Cr-V) steel with black oxide and matt finish for resistance to corrosion. OEM: T10158/1.

  • ASTA A-PC38 Coolant Thermostat Key For VAG (Cover)
    • New
    • Out-of-Stock
    0 Review(s) 

    ASTA A-PC38 Coolant Thermostat Key For VAG

    A-PC38
    £10.91

    Professional coolant thermostat key for VAG 3 cylinder 1.0 TFSi, 4 cylinder 1.2 TSI, 1.4 FSi/ TFSi petrol and 3 cylinder 1.4 TDi CR diesel engines manufactured from 2013 onwards. Specially designed for removal and installation of the water pump thermostat on Audi and Volkswagen without damage. Feature special 4 pin profile tool for use with 3/8" drive ratchet or extension bar. Made of hardened and tempered Chrome Molybdenum (Cr-Mo) steel with manganese phosphate finish for extra corrosion resistance. OEM: T10508.

    Out-of-Stock
  • 0 Review(s) 

    ASTA A-8IPN Ball Joint Separator Impact Nut Set

    A-8IPN
    £56.80

    Professional ball joint separator impact nut set for the removal of suspension ball joints, drive shafts, steering knuckles from wishbone, wheel studs and strut assemblies using an impact hammer. Specially designed to replace ball joint nut with the separator nut and ensure it reaches the end of the joint thread. Ball joint can be quickly shake out free by using air impact hammer vibrations equipped with the taper punch. Feature two impact nut sizes for larger drive shaft threads for removing stuck splined drive shafts from the hub. Set includes M10x1.5, M12x1.25, M12x1.5, M14x1.5, M14x2.0, M16x1.5, M16x2.0 and M24x1.5 separator nuts. Made of hardened and tempered Chrome Molybdenum (Cr-Mo) steel. Air hammer and chisel kit (SATRA S-190KIT) sold separately. Supplied in handy storage case.

    Last items in stock
  • 0 Review(s) 

    ASTA A-W33GM Steering Wheel Puller For Vauxhall/ Opel

    A-W33GM
    £40.56

    Professional steering wheel puller for easier and secure removal of the steering wheel on Vauxhall/ Opel. Specially designed to be used in conjunction with a 17mm spanner or socket. Feature 2 legged extractor with internal size of 50mm, external size of 33mm and thrust nut. Suitable for Vauxhall/ Opel Vectra B, Zafira B, Omega B, Tigra A and some other GM vehicles. Made of hardened and tempered Chrome Vanadium (Cr-V) steel with black oxide and matt finish for  resistance to corrosion.

    IMPORTANT: Always lubricate the thrust nut with molybdenum disulphide grease before use and never use with impact tools.

    Last items in stock
  • 0 Review(s) 

    ASTA A-PA5T Auxiliary Belt Tensioner Tool Set For Ford & PSA 1.4, 1.5, 1.6, 2.0. 2.2 Diesel

    A-PA5T
    £45.95

    Professional auxiliary belt tensioner tool set for Ford 1.4, 1.5, 1.6, PSA 1.4, 1.6, 2.0, 2.2 HDi diesel engines also fitted to Mazda and Volvo. Specially designed for secure and controlled way of adjusting the tensioner position during removal and installation of the auxiliary belt. Feature a raised peg with point to apply leverage to the tensioner to help changing or replacing the belt. Suitable for Ford 1.4 (F6JB, F6JD), 1.6  Duratorq TDCi, 1.5 EcoBlue, Mazda 1.6 (MZ-CD Y6), PSA (Citroën, Peugeot) 1.4 (DV4), 1.6 (DV6), 2.0 (DW10), 2.2 (DW12) HDi and Volvo 1.6 (D4164T). Set includes various adaptors, extension bar that enable convenient attachment to the raised peg and to be used with a 1/2" drive ratchet or tensioner wrench.

    Last items in stock
  • 0 Review(s) 

    SATRA S-N2026 Locking Tool Kit For BMW 1.6, 2.0 N20 & N26 Petrol

    S-N2026
    £90.37

    Locking tool kit for chain driven BMW 1.6 and 2.0 (N20, N26) petrol engine. Specially designed to lock intake and exhaust camshaft for assembling or dismantling as well as fix camshaft at their correct top dead center (TDC) position while adjusting or replacing timing cam chain. Set includes all necessary tools for setting the Vanos unit position and the timing chain pre-tension. Can be use with the balance shaft and oil pump alignment set (ASTA A-BSO) and flywheel holding tool (ASTA A-B2026F) sold separately. Supplied in carry case.

    Last items in stock
  • 0 Review(s) 

    SATRA S-XP14P Locking Tool Kit For Porsche & VAG 2.4, 2.5, 2.8, 3.0, 3.2 Petrol

    S-XP14P
    £105.86

    Locking tool kit for belt, chain driven 2.5L FSi (5 cylinder), 2.8 FSi, 3.0 TFSi, 2.4, 3.2 V6 FSi petrol engines fitted to Porsche, VAG and Audi V6, V8, V10 petrol engines. Specially designed to check, adjust camshaft drive chain or lock the engine in correct timing position for cam chain removal and replacement. Suitable for Audi A4 (2014-2015), A5 (2014-2017), A6 (2012-2018), A7 (2010-2018), A8 (2010-2018), S4 (2014-2017), S5 (2011-2017), Q5 (2008-2017), Q7 (2010-2018), SQ5 (2013-2017), Volkswagen Touareg (2012-2017) and Porsche Cayenne S Hybrid (2010-2014), Panamera (2011-2013). Set includes all necessary tools for setting the engine timing when replacing the cylinder head gasket, timing chain or camshaft. Supplied in carry case.

    Last items in stock
  • 0 Review(s) 

    SATRA S-IS429C Injector Seat & Port Shaft Cleaning Kit

    S-IS429C
    £52.74

    429pc comprehensive injector seat and port shaft cleaning kit to clean and decarbonise the injector bores as well as the inner-seat hole on diesel engines. Specially designed brushes to fit injector washer seat and remove carbon, rust or other debris without any damage to the engine. Feature driver handle, rigid extension bar with spring-loaded quick-release coupler and flexible extension bar with locking screw for easier access into hard to reach areas. Set includes different shape cotton swabs and different diameter bore, helix or two stage brushes made of wear resistance stainless steel for automotive and industrial use. Supplied in carry case.

  • 0 Review(s) 

    SATRA S-1TBH Tyre Bead Retainer

    S-1TBH
    £9.95

    Tyre bead retainer for easy change of tyre and mounting or demounting flat run tyre on the rim. Specially designed holder to prevent the tire bead from slipping off the rim edge. Feature a cleverly designed lever for stretching of the tire over the rim during use on a tire changer. Made of high-quality and robust polypropylene (PP) material to avid scratches or damages to your rims.

  • 0 Review(s) 

    ASTA A-DOF84 Fuel Filter Housing Wrench For Mercedes 1/2" Drive

    A-DOF84
    £26.57

    Professional fuel filter housing wrench for the removal and installation of the plastic fuel filter housing on 1.6, 2.0 and 2.2 diesel engines fitted to Mercedes-Benz. Specially designed for use with 1/2" drive ratchet or extension bar. Feature 14-flute profile and an 84mm diameter to ensure perfect fit, secure grip and efficient fuel filter replacement avoiding damage to the filter housing.

    Last items in stock
  • 0 Review(s) 

    SATRA S-VCGTDI Locking Tool Kit For Ford 1.0 GTDi & 1.1 EcoBoost Petrol

    S-VCGTDI
    £104.57

    Locking tool kit for belt driven 3-cylinder turbocharged Ford 1.0 GTDI and 1.1 Ti-VCT EcoBoost petrol engines manufactured from 2012. Specially designed to help secure the engine in the correct timing position for safe cambelt removal and replacement. Set includes camshaft vvt adjustment tool (exhaust & inlet), crankshaft pulley alignment pin, flywheel holding tool, auxiliary belt tensioner locking pin, tensioner pulley locking pin and VCT locking tool (exhaust & inlet). Should be used in conjunction with Torque multiplier for removal and installation of the crankshaft pulley bolt on Ford 1.0 EcoBoost (ASTA A-RGBF) sold separately. Supplied in a carry case.

    Last items in stock
  • 0 Review(s) 

    SATRA S-WB34PT Wheel Bearing & Hub Removal & Install Tool Kit

    S-WB34PT
    £105.86

    34pc comprehensive wheel hub bearing kit for removal and installation of wheel bearings or wheel hubs on front-wheel drive vehicles with no risk of damage. Specially designed for simple bearing, hub replacement without need for shock absorber, knuckle or steering components disassembly. Perfect for removing and installing large industrial bearings. Suitable for Chrysler, Ford, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Nissan, Toyota and VAG. Supplied in carry case.

    IMPORTANT: Always lubricate the threaded spindle, bearing and pressure nut with molybdenum disulphide grease before use. Never use with impact tools.

  • 0 Review(s) 

    SATRA S-MOCD Front Control Arm Bush Removal & Install Tool Kit For MINI

    S-MOCD
    £57.34

    Front suspension arm bush tool kit for removal and installation of the front control arm bush on BMW MINI vehicles. Specially designed to be use in-situ directly on the vehicle without removing of the front axle, subframe, suspension leg, trailing arm or wishbone. Can be used in a standard workshop press. Suitable for MINI R50, R52, R53, R55, R56, R57, R58 and R59 (2001-2012). Tool will fit bushes with OEM numbers - BMW 31 12 6 767 530 and MINI 31 12 6 757 551. Supplied in carry case.

    IMPORTANT: Always lubricate the threaded bar with molybdenum disulphide grease before use and never use with impact tools.

    Last items in stock
  • 0 Review(s) 

    SATRA S-ST56M 2-Point Suspension Strut Wrench (5 & 6mm)

    S-ST56M
    £8.95

    2 point rear suspension strut wrench size 5mm and 6mm. Specially designed to prevent the damper piston rod from turning during rear suspension strut removal or replacement. Feature 5x8mm and 6x9mm 2-point profile with overall length is 182mm. Suitable for use with Ford, GM (Saab, Vauxhall/Opel), Honda, Toyota, and VAG (Audi, Seat, Skoda, Volkswagen) vehicles.

  • 0 Review(s) 

    SATRA S-WH150G Wheel Hub Cleaner 1/2" Drive Ø150mm

    S-WH150G
    £26.57

    150mm heel hub cleaner for cleaning studless wheel hubs by eliminating corrosion and dirt from the contact area of the hub and the inner part of the wheel. Specially designed to clean studs, brake discs, brake drums and prepare hubs for wheels to be reinstalled on the vehicle. Suitable for use with a 1/2" drive impact wrench and requires only light pressure for optimal performance. Feature an external diameter of 150mm and an internal diameter of 90mm. Replacement hub cleaning abrasive pads (SATRA S-RG150W) sold separately.