SATRA TIG200PACDC is a device for manual TIG welding of aluminum and structural and quality steels, stainless steel, copper and its alloys. The inverter is fan cooled and has overload protection.

GREAT QUALITY FOR THE BEST PRICE!

• smooth regulation of welding current,
• ionization ignition (non-contact HF),
• electronic display indicating the welding current,
• MMA / TIG and 2T / 4T switches,
• starting current
• the ratio of the currents in the pulse
• gas flow after welding
• AC balance
• sink current (prevents the formation of an end crater),
• full regulation of pulse parameters (base current, frequency),
• AC frequency control (allows arc focusing when welding aluminum)
• aluminum welding - TIG AC / DC
• welding of stainless steel - TIG DC

MMA welding with a coated electrode:

• Arc Force - Provides the best settings for a stable arc and low spatter.
• Anti Stick - reducing the current to the minimum value in the event of the electrode shorting to ground.
• Hot Start - a temporary increase in the welding current to facilitate the ignition of the electric arc and preheating of the welded material.
• Welding with coated electrodes, normal and high-strength structural steel.
• Cold and hot welding of cast iron with coated electrodes.
• MMA welding of alloyed and stainless steels.

Device Type: TIG200PACDC

• Power consumption: 4.6 KVA
• Supply voltage: AC230V ± 15%; 50 / 60Hz
• Rated power: 18V / 200A
• Input current: 17.8 A
• Rated output current (DC): 185A
• Rated output current (AC): 148A
• No-load voltage (DC): 62V
• No-load voltage (AC): 56V
• Working voltage: 17.4V
• AC output frequency (Hz): 60
• Pulse frequency (Hz): 0.5-300
• Output current adjustment: 10-200A
• Performance: 85%
• Efficiency: 40%
• Argon burner: WP-26
• Ground clamp: 3m
• Electrode holder: 3m
• Suitable DC welding thickness: 0.5 - 10mm
• Power cord: 2.1 m
• Protection class: IP23S
• Power factor: 0.93
• Weight (kg): 30
• Insulation class: F