Diesel injector nozzle tester with 400mm hand lever design to test diesel injectors under pressure for atomisation, spray pattern and opening pressure or any leakage between the injector needle and injector body. Feature large gauge with rubber cover, reading up to 400bar and 5800psi and transparent tank made of plastic with integrated fine filter.

Camshaft sprocket pulley puller set specially design for VAG (Audi, Seat, Skoda, Volkswagen) V6 and V8 engine with 4 or 6 cylinders. Different types of pulling arms will fit any number of spokes on the camshaft pulley (camshaft sprocket). Finished with 17mm hex head as well as ball end to reduce potential damage to sprocket. Recommended use with camshaft locking bar for VAG 2.4, 2.7, 2.8 30v (ASTA A-VAG2425TDI) and timing tool strap for VAG 3.7, 4.2 V8 (ASTA A-VAGV6V8TDI) petrol engine.

Professional 12-sided 18mm camber adjusting offset wrench to make adjustments to the rear multi-link suspension on VAG vehicles for use 1/2" drive ratchet or extension bar. Specially designed 12-point (12pt) ring profile spanner to access hard to reach areas and facilitates quick adjustments to concentric screws. Suitable for Audi A3, A4, A6, A8, TT (from 2001), Seat Alhambra, Altea, Ateca, Cordoba, Ibiza, Toledo (from 2002), Skoda Citigo, Octavia, Superb, Yeti (from 2004) and Volkswagen Eos, Golf, Jetta, Passat, Polo, Scirocco, Tiguan, Touran (from 2002). Made of hardened and tempered Chrome Vanadium (Cr-V) steel with matt finish for corrosion resistance. OEM: T10179.

Precise camshaft pulley holding tool for chain driven Fiat, Vauxhall/ Opel 1.3 JTD MultiJet/ CDTi diesel engine also fitted to Alfa Romeo, Ford, GM (Chevrolet, Chrysler), Lancia, PSA (Citroen, Peugeot), Suzuki vehicles. Specially designed to adjust the tension of the camshaft gear bolts without damage to timing tools being in use. Suitable for use with 1/2" drive ratchet or extension bar. Comprehensive timing tool set for Fiat, Ford, GM, PSA, Suzuki 1.3 diesel engine (ASTA A-8248) sold separately. OEM: 1.871.008.600, 303-1475.

Camshaft locking tool design to lock camshaft in gear driven 2.8L TDI diesel engine manufactured between 1997 to 2006, fitted to popular Volkswagen LT van. Should be use to check and set correct valve timing.

Professional diesel injector copper washer tool specially designed for removal and installation of injector seal onto the cylinder head. Feature adjustable end tip with internal diameter between Ø6.7-8.7mm. Suitable for deep seated diesel injectors, simply put the tool into the injector hole, tighten the handle and pull out the seal. Diesel injector seat cutter set (ASTA A-217) sold separately. Supplied in handy carry case.

Professional adjustable and self-locking 250mm (10") long water pump pliers specially designed to apply torque while holding or griping pipes, fixings, round or flat surfaces. Feature serrated jaws with opening between 0-50mm and 12 different interlocking positions operated by quick push button mechanism for rapid adjustment. Suitable for car maintenance and a wide range of plumbing jobs. Made of high quality carbon steel with comfortable handles coated with thin non-slip PVC. 300mm (ASTA A-CP12), 410mm water pump pliers (ASTA A-CP16) and 266mm adjustable pliers and wrench (ASTA A-CP25K) sold separately.

300mm (12") long adjustable self-locking water pump pliers featuring 15 different positions with serrated jaws (range between 0-46mm) operated by quick push button mechanism for rapid adjustment. Made of high quality carbon steel with comfortable handles coated with thin non-slip PVC. Pliers are designed to apply torque while holding or griping pipes, fixings, round or flat surfaces, ideal for a wide range of plumbing jobs and maintenance. 266mm adjustable pliers and wrench (ASTA A-CP25K) and 400mm water pump pliers (ASTA A-CP16) sold separately.

400mm (16") long adjustable self-locking water pump pliers featuring 27 different positions with serrated jaws (range between 0-95mm) operated by quick push button mechanism for rapid adjustment. Made of Chrome Vanadium (Cr-V) steel with comfortable handles coated with thin non-slip PVC. Pliers are designed to apply torque while holding or griping pipes, fixings, round or flat surfaces, ideal for a wide range of plumbing jobs and maintenance. 266mm adjustable pliers and wrench (ASTA A-CP25K) and 300mm water pump pliers (ASTA A-CP12) sold separately.

266mm long adjustable universal pliers and wrench in a single tool (2-in-1), self-locking and featuring 24 different positions. Smooth self-clamping flat jaws allow damage free work on pipes, fixings, square, hexagonal or round shapes (range between 0-50mm) set directly on the surface to be gripped and easy adjusted by press of a button. Made of high quality carbon steel with comfortable handles coated with thin non-slip PVC. Pliers are designed to apply more then 10:1 torque lever transmission while holding or griping, ideal for a wide range of plumbing jobs and maintenance. 300mm water pump pliers (ASTA A-CP12) and 400mm water pump pliers (ASTA A-CP16) sold separately.

Injector puller specially designed to extract in-situ common rail fuel injectors from BMW M47 and M57 2.0, 2.5, 3.0L diesel engine without need for removal of the cylinder head. Suitable for some BMW, Land Rover, MG and Vauxhall/ Opel vehicles fitted with M47 and M57 diesel engine. Set includes pulling bridge, short and long bridge leg, injector force screw M17x1mm and nut, Ø27mm injector cap socket and 10mm security hex key. Supplied in carry case.

Replacement stud hub cleaner pads for 14pc stud hub cleaner set - Ø38mm (ASTA A-RH38R) sold separately. Features velcro back side for easy hook and loop mounting. Suitable for all other stud hub cleaners with external diameter of 38mm. Supplied individually.

Short scraper with long lasting double sided 32mm wide tungsten carbide tip for removal of carbon, burned corrosion, excess rust, gasket seal, glue, paint and many more. Extra sharp flat blade suitable for use on brake calipers and back plate sliding faces, aluminum and steel cylinder heads or gaskets, exhaust manifolds as well as serrated blade for use on grooves, corners, edges on various surfaces and other engine parts. Feature ergonomic handle with black electroplated short shaft for use in tight areas. Versatile tool designed to be use either pulled or pushed.

50pc self locking black zip cable ties (5x250mm) manufactured from high quality heavy duty nylon designed to keep wires and electrical cables tidy. Must have for garage, workshop, as well as home or DIY use. Suitable for auto cut cable tie tensioning tool (SATRA S-NC2448). Supplied in display hanging pack.

50pc self locking blue zip cable ties (5x250mm) manufactured from high quality heavy duty nylon designed to keep wires and electrical cables tidy. Must have for garage, workshop, as well as home or DIY use. Suitable for auto cut cable tie tensioning tool (SATRA S-NC2448). Supplied in display hanging pack.

50pc self locking red zip cable ties (5x250mm) manufactured from high quality heavy duty nylon designed to keep wires and electrical cables tidy. Must have for garage, workshop, as well as home or DIY use. Suitable for auto cut cable tie tensioning tool (SATRA S-NC2448). Supplied in display hanging pack.